Upgrade the 3D printer FlashForge Dreamer. Printing bracket
I for the 3d printer FlashForge Dreamer basically buy plastic in coils on 0,5 kg. The supplier winds this weight on bobbins with a diameter of 200 mm. Native reels from Dreamer have a diameter of 180 mm.
Place in the printer is still there for the bobbins 200 mm. The bobbin is held by a special bracket. This bracket we will print a new one. We make it from red ABS plastic.
================================================== ========
BRACKET PRINTING PARAMETERS:
Overall dimensions of the bracket: 99 x 45 x 32 mm;
Overall dimensions of the bracket: 99 x 45 x 32 mm;
Layer thickness: 0.25 mm;
Degree of filling 20% -25% (optional);
Number of layers along the perimeter: 3 layers;
Printing time (1 piece): 2 hours 20 minutes;
Special support was used (see video);
DOWNLOAD 3D MODELS: https: //petr-m.com/2017/04/26/flashfo ...
================= USEFUL LINKS: ======================
►My site: http://www.petr-m.com
►MY COURSES: http://petr-m.com/my-curse/
►My FACEBOOK: / swlesson.mpl.ru
►YURVACTION: https://vk.com/swlesson
►Shop of 3D-models: http://www.3dbazar.com
================================================== =======