Cap for the disc. Modeling for 3D printing. Solidworks
Hello, friends. Today I am launching a series of lessons on 3d-modeling of typical parts for 3d printing. And the lessons will be recorded immediately in two versions: modeling in SolidWorks and Fusion 360. These lessons will be free and will be uploaded to two YouTube channels at once:
SolidWorks Tutorials: / pit198221
3D-MPL (Fusion 360): / 3d-mpl
This is a very time consuming business, but I did not make these lessons as commercial as my courses.
A system of voluntary donations and donations will work. Links and details I attach:
================
DONATIONALERTS: https://www.donationalerts.com/r/3dmpl
WebMoney: Z147898355795
BTC: 3EfgGiCuog6ryTy7rocCdMFSHxRLVa9a2p
ETH: 0x120a0C53e75F97B4e5E0845c267F54Da33a9edCE
================
In this tutorial, we will examine the 3D-modeling cap for the cast disk AUDI in the program SolidWorks. This is a real example of a cap, the photo of which was sent to me by my subscriber.
DOWNLOAD 3D models: https://petr-m.com/2019/02/09/kolpach...
================= USEFUL LINKS: ======================
►More lessons on the site: http://www.petr-m.com
►MY COURSES: http://petr-m.com/my-curse/
►MY FACEBOOK: / swlesson.mpl.ru
►YA VKONTAKTE: https://vk.com/swlesson
► ORDER LESSONS TO E-MAIL: http://petr-m.com/podpiska-petr-m/
► Shop 3D-models: http://www.3dbazar.com
================================================= =======