How to scan Pantone in SolidWorks?
This short mini tutorial we look at how to make a complex surface scan Pantone. Toolkit "Sheet Metal" is not suitable. Therefore, we will look for other SolidWorks tools. In fact, you need to solve two problems:
1. Build a complex surface Pantone
2. Construct a scan of the surface
LESSON PLAN:
1. Introduction. Formulation of the problem
2. Construction of Pantone geometry (profiles sketches)
3. Add reference planes
4. Construction of the guide circles
5. surface modeling (loft)
6. Check the topology and mesh surface
7. Create a cut in the surface of the Pantone
8. Create a sweep Pantone
9. The results of the lesson
DOWNLOAD MODEL LESSON: http://petr-m.com/2016/06/08/razvertk...
================= USEFUL LINKS: ======================
►Bolshe lessons online: http://www.petr-m.com
►MOI COURSES: http://petr-m.com/my-curse/
►MOY FACEBOOK: / swlesson.mpl.ru
►YA VKONTAKTE: https://vk.com/swlesson
►ZAKAZAT LESSONS FOR E-MAIL: http://petr-m.com/podpiska-petr-m/
►Magazin of 3D-models: http://www.3dbazar.com
================================================== =======