🔵 How To Scan DSTV FTA Channels | Quality Advanced S2 Combo Decoder
How To Scan DSTV FTA Channels | Quality Advanced S2 Combo Decoder
To scan for DSTV Free-To-Air (FTA) channels on your Quality Advanced S2 Combo Decoder, follow these steps:
Step 1: Ensure Proper Dish Alignment
Ensure that your satellite dish is properly aligned to the DSTV satellite, which is Eutelsat 36B (36° East).
Step 2: Access the Main Menu
1. **Turn on your decoder and TV**: Make sure both the decoder and TV are turned on and connected properly.
2. *Press the `Menu` button* on your remote control to access the main menu.
Step 3: Navigate to Installation/Setup
1. *Use the arrow keys* on your remote to navigate to the `Installation` or `Setup` section. Press `OK` to enter.
2. Select `Antenna Setup`, `Dish Setup`, or a similar option that lets you configure satellite settings.
Step 4: Select the Satellite
1. *Scroll through the list* of available satellites and select `Eutelsat 36B` (sometimes labeled as `Eutelsat 36° East` or `W7/W4`).
2. *Confirm the selection* by pressing `OK`.
Step 5: Add/Edit Transponder/Frequency
1. *Find the option* to add or edit transponder/frequency settings. This may be labeled as `Add TP`, `Edit TP`, or `Transponder List`.
2. *Enter the following details* for a common FTA transponder on DSTV:
**Frequency**: `12722 MHz`
**Symbol Rate**: `26657 KS/s`
**Polarization**: `Horizontal (H)`
3. *Save the settings* by pressing `OK` or `Save`.
Step 6: Scan for Channels
1. *Go back to the main installation menu* and select the option to scan for channels. This could be labeled as `TP Scan`, `Manual Scan`, or `Blind Scan`.
2. *Select the transponder* you added (12722 MHz, 26657 KS/s, H) and choose `Scan` or `Search` to start the scanning process.
Step 7: Wait for the Scan to Complete
1. *Allow the scan to run* until it completes. This may take a few minutes.
2. **Review the list of found channels**. The decoder will display the FTA channels found on the selected transponder.
Step 8: Save and Exit
1. *Save the scanned channels* if prompted.
2. *Exit the installation menu* by pressing the `Exit` or `Back` button on your remote.
Step 9: Access the Channel List
1. *Navigate to your channel list* using your remote control to find and watch the newly added FTA channels from DSTV.
Important Notes:
**FTA Channels**: Free-To-Air channels are not encrypted and can be viewed without a subscription. Ensure you are scanning the correct transponder that carries FTA channels.
**Updates**: Satellite transponder details can change. For the most current FTA transponder information, check satellite TV forums or DSTV's official resources.
If you encounter any difficulties, refer to your decoder’s user manual for specific instructions or contact the manufacturer’s customer support for assistance.
_____________________________________
LINKS
Visit The WEBSITE for more Info:
https://www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
https://t.me/pbtecknology
PBTECKNOLOGY
/ pbtecknology