UpCut CNC/Router Bits Cutting in Slow Motion! Part 3
In Part 3 we will show you the benefit to using an UpCut bit, they will leave a sharp, clean edge on bottom surface of your workpiece. However as you can see in the video they will leave you with a rougher top surface, due to the fact they are pulling up the fibers of the material as they are cutting.
UpCut bits allow for rapid cuts since the tool clears the chips away from the material. While Ideal for cutting thicker materials, this type of tool is not recommended for thinner or softer materials. They are more likely to tear the top surface with the cutting edges because they’re pulling the wood fibers up while cutting. When cutting laminated materials, such as plywood with a thin top veneer, that can matter a lot. This type of bit is used whenever the best finish is needed on the bottom side of a part, or when you are drilling holes or dados in to your materials.
Please visit our Website for more details - https://bitsbits.com/product-category...
(Video credit goes to Jonathan Katz-Moses Woodworking)