102. How to Configure Port Security | Port Security Practical On Packet Tracer | 200-301 | Part - 2
Port security is a feature used in network switches to control access to a network by limiting the number of MAC addresses allowed on a particular port. This helps prevent unauthorized devices from gaining access to the network. I'll provide a basic guide on how to configure port security on Cisco switches using Packet Tracer. Note that Packet Tracer is a simulation tool, and some advanced features might not be available in the tool.
Here's a step-by-step guide:
1. *Access Packet Tracer:*
Open Packet Tracer on your computer and create a new network or open an existing one.
2. *Add a Switch:*
Add a Cisco switch to the workspace. Connect it to a router if you want to simulate a more complex network.
3. *Add a Host:*
Add a computer or end device to the network. Connect it to one of the switch ports.
4. *Access the Switch CLI:*
Right-click on the switch and select "CLI" to access the command-line interface.
5. *Navigate to Interface Configuration Mode:*
Use the following commands to navigate to the interface configuration mode for the port to which your host is connected:
```bash
enable
configure terminal
interface fa0/1 # Use the appropriate interface (fa0/1, fa0/2, etc.)
```
6. *Enable Port Security:*
Use the following commands to enable port security on the interface:
```bash
switchport mode access
switchport port-security
```
7. *Configure Maximum Number of Secure MAC Addresses:*
Set the maximum number of allowed MAC addresses on the port (you can adjust the number as needed):
```bash
switchport port-security maximum 2 # You can change '2' to the desired number
```
8. *Configure Violation Mode:*
Choose how the switch should respond when a violation occurs. There are three violation modes: protect, restrict, and shutdown. For example, to shut down the port on a violation, use:
```bash
switchport port-security violation shutdown
```
9. *Configure Aging Time (Optional):*
You can configure the aging time for dynamically learned MAC addresses (optional):
```bash
switchport port-security aging time 5 # Time in minutes (adjust as needed)
```
10. *Save Configuration:*
Exit interface configuration mode and save the configuration:
```bash
end
write memory
```
Now, your switch port is configured with port security. If the connected device exceeds the allowed number of MAC addresses or violates the configured rules, the switch will take the specified action (e.g., shutting down the port).
Remember that in a real-world scenario, you may need to consider the specific requirements of your network and adjust the configuration accordingly. Additionally, Packet Tracer may not support all features, so some options might be limited in the simulation environment.
ccna #ccnp #ccie #cisco #networksecurity #networking #vlan #crawnetworking #crawsec #best #port #security #fortnite #viral #ciscopackettracer #portsecurity #switch
#
*******************************************
Find Us On:
Telegram :- https://t.me/joinchat/GFZL9xel7jTspUK...
Discord: / discord
Facebook: / crawsec
Instagram: / crawsec
LinkedIn: linkedin.com/in/crawsec
Twitter: / crawsec
Discord: / discord
****************************************
Connect With Cybersecurity Expert Mohit Yadav On:-
Website : http://www.mohityadav.com
Instagram :- / mohityadavc. .
Facebook:- / mohityadavcraw
LinkedIn:- / mohit-yadav