How-To 2013 Honda Accord Cargo Hook Installation
How To :Honda Accord Cargo Hook Accessory Install
PARTS LIST:
Cargo hook
Bolt
Small washer
Spring washer
Rivet nut
Accessory User's Information Manual
Flange nut
(Not used)
Large washer
TOOLS AND SUPPLIES REQUIRED:
Hex wrench
19 mm Open end wrench
10 mm Socket
Ratchet
Torque wrench
Rivet Nut Tool, 6 mm (P/N 07AAE-000A100)
1. Thread the rivet nut onto the mandrel of the 6 mm rivet nut tool as shown.
2. Open the trunk lid. Insert the rivet nut into the hole in the vehicle panel, and install the hex wrench on the rivet nut tool.
3. While holding the rivet nut tool with the hex wrench, turn the 19 mm wrench counterclockwise and install the rivet nut to the vehicle panel.
4. Remove the rivet nut tool from the rivet nut by turning the hex wrench counterclockwise.
5. Align the cargo hook pin with the hole in the vehicle panel, and secure the cargo hook to the vehicle panel using the bolt, small washer, and spring washer. Torque the bolt to 4.0 N•m (3.0 lbf•ft).
http://www.ezhondaparts.com
/ ezhondaparts
/ ezhondaparts