Replace Front Transmission Mount on Ford Escape 2.5L (09-12) - Easy DIY
The video shows how to remove and reinstall the lower front transmission support mount (also known as Transaxle front Support Insulator) on the following 2nd generation Ford Escape vehicles equipped with a 2.5L FWD engine. This method may work on older Ford Escapes as well.
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape
Tools required:
• 15 mm socket
• 3/8 socket extension
• 3/8 Ratchet
• 3/8 Breaker Bar
• Penetrating Oil PB Blaster -- https://amzn.to/4jUPTJa
• Torque wrench
Parts:
• Motorcraft Dealer Part: 9L8Z6P094C (Comes with crossmember 2009-2012 Ford Escape 4 cylinder only)
• Autozone Duralast Motor Mount 3222 (SKU# 411661)
Torque specifications:
2 x 15 mm bottom mounting bolts: 66 lb-ft.
15 mm through bolt: 85 lb-ft.
#diymechanics #ford #fordescape
Disclaimer: The information provided in this video and description is for informational purposes only. Please use your judgment and proceed at your own risk. The author or publisher of the video assumes no liability for any damage or injury caused by following the information provided. Please remember that when working on any DIY project, you bear all the risks alone. Seek professional assistance if you are uncertain about your ability to perform the work.