Airblade UAV Eclair V2 Build
Airblade UAV Eclair V2 Pro Build
00:10 Quadcopter Frame
00:44 Airblade Eclair Backpack
01:15 Airblade UAV Eclair V2 Pro and Lite Specs
03:05 Total Frame Weight Including Hardware
03:16 Airblade Eclair Backpack Weight
03:30 Mounting and Lipo Battery Strap
03:49 Matek F405 Mini Flight Controller and Matek Fchub A5 PDB
05:05 Control RX - Spektrum Quad Race Serial Receiver
05:32 Whitenoise FPV Mounting Board 5v
05:55 How the Flight Controller Stack will be Mounted
06:13 Installing the Ribbon Cable into the Matek Fchub A5 PDB
06:40 Waterproofing with Silicone Conformal Coating and
CorrosionX HD
07:50 TBS Unify Pro VTX & Unify Pro Mounting 5v Version
09:42 Flashing Firmware on the Flight Controller with Betaflight
12:39 CLI Commands for Camera Control and SBUS Telemetry
12:55 Depinning RX and Soldering it to the Whitenoise Board
15:28 Soldering TBS Unify Pro to Whitenoise FPV Board
17:54 Tinning the Flight Controller
18:25 Tinning the Power Distribution Board
20:20 ESC Telemetry and BLheli_32
20:52 Soldering Main Lipo Battery Leads
21:17 Mounting the Flight Controller on the PDB
24:39 Soldering Spedix 20a Lite ESC, BLheli_S to the PDB
26:28 Soldering ESC to Emax RS1306 4000kv Brushless Motors
27:40 Tinning and Soldering the Flight Controller
30:50 WhiteNoiseFPV Board Woes - Soldering VTX and RX to Board
34:41 Betaflight Setup and Configuration
41:30 ESC Flashing and Setup: • Video
43:35 Mounting the RX Antennas
43:34 FPV Camera - Runcam Swift Mini
44:49 Maiden Indoor Hover
45:08 Choosing the Lipo Battery, Lighten the Weight
ImpulseRC Driver: https://impulserc.com/pages/downloads