PowerEgg2 - HWg Video Flyer - HV85
Product page: https://www.hw-group.com/sensor/power...
PowerEgg2 combines two functions in one device: power Detector & Control. Detector indicate failures of electricity supply (110/230V, single phase) via relay output. Power Control can switch Off/On power supply output 8A, it's controlled with a low voltage input. The PowerEgg2 can be connected to any device with digital inputs (DI) and digital outputs (DO).
The PowerEgg2 combines two functions in one device:
1) Detector: Detects voltage, its presence is indicated by a relay output (galvanically isolated).
2) Control: Controls an output electricity socket, max. 8A.
PowerEgg2, together with e.g. Poseidon 3266 or Damocles MINI, can be used to monitor the presence of the line voltage at the input of an UPS.
PowerEgg2 can disconnect its output with a relay contact, which can be used to remotely power on or off a server.
Both functions are galvanically isolated and can be connected to any dry contact input or relay output.
• DETECTOR Input: Voltage detection (110/230V) - IEC-320 C14;
• DETECTOR interface: Connect to any dry contact DI (digital input);
• CONTROL Output: Turns on/off the 110/230V output voltage (max 8A) – can be connected to any digital output - IEC-320 C13;
• CONTROL interface: Connect to any DO (digital output) - relay or open collector;
• Compatible with: Poseidon 3266, 3268, 3468, 4002, 2250, Damocles 1208, MINI, 2404, I/O Controller XXXX, HWg-Ares.
HV85