Illuminate Your Truck Bed with This Simple LED Light Installation Guide
You can never have too much LED light. Here is a step-by-step installation guide on how to install LED lights in your truck bed.
These truck bed LED lights can be installed in just a few steps:
1.) Clean Surface
First, use Isopropyl alcohol to wipe down all surfaces you will be sicking lights too. Then use an adhesion promoter to enhance the grip between the lights and the surface you are sticking them too.
2.) Install LED light Strips
Stick your light strips on a few inches at a time while making sure there is a solid connection between the 3M backing tape and the mounting surface.
3.) Pull Power Cable
You will need to pull a power cable from your battery to the bed of your truck. Be sure to add an inline fuse near the battery to protect the system.
4.) Connect All Lights to Power
The connection between your lights and your power cable will be made using an external switch. Be sure to use quality crimps and heat shrink to create quality three-way connections between all lights and your switch.
In just 4 simple steps, you can install LED lights in your truck bed.
Products Used:
BLUEWATERLED Truck Topper LED Lighting System: https://thmarinellc.com/3S4ji7h
BLUEWATERLED Connection Wire: https://thmarinellc.com/3SkeKez
3M Adhesion Promoter: https://thmarinellc.com/3Hkb71Y