Milling titianium (uncoated OP2)
Parameters were 200 sfm(1575 rpm) 18 IPM (.0028 ipt) .225 radial and .625 max axial. The endmill diameter was .486. The cutter is good for 16 parts with minimal damage. 002 IPT feed rate should double tool life.
Parameters were 200 sfm(1575 rpm) 18 IPM (.0028 ipt) .225 radial and .625 max axial. The endmill diameter was .486. The cutter is good for 16 parts with minimal damage. 002 IPT feed rate should double tool life.