Slotting 4140 at 100ipm
About a month ago I told some people I could slot 1018 1xD at 100 ipm. All I had on hand was 4140CR. 6200 rpm, 100 ipm at .500 deep. Endmill diameter is .490. The load meter was at 115%.
About a month ago I told some people I could slot 1018 1xD at 100 ipm. All I had on hand was 4140CR. 6200 rpm, 100 ipm at .500 deep. Endmill diameter is .490. The load meter was at 115%.