Pico Hash Mini Humanoid Robot Using Raspberry Pi Pico | Part 1 | Hash Robotics

Опубликовано: 21 Июль 2026
на канале: Hash Robotics

11,072

165

Hello Humanoids...
Apologies for the long gap...
Here is the part 1 video of pico hash making. In this video, I have explained the 3D design and assembling.
Components used-
1. 3D printed parts
2. Raspberry pi pico
3. PCA9685 servo drive
4. LM2695 DC-DC buck converter
5. 12V battery
6. M3 * 10MM screws
7. Jumper wires
8. PCB board

Get 3D design here: https://hashrobotics.gumroad.com/l/pi...
Get the source code and circuit here: https://github.com/hashrobotics-hr/pi...

Also, watch my other videos...
ROS for Beginners Introduction to ROS:    • ROS for Beginners | Part 01 - Introduction...
3D printed 19DOF humanoid robot using Arduino:    • 3D printed 19DOF humanoid robot using ardu...
Obstacle avoiding robot using Raspberry Pi Pico with Micropython:    • Obstacle avoiding robot using Raspberry Pi...
Humanoid robot with voice and face expression using ESP32:    • Humanoid robot with voice and face express...

Stay connected...
Facebook:   / hashrobotics
Instagram:   / hash_robotics
Twitter:   / hash_robotics