How to Upgrade Firmware in USBasp Programmer

Опубликовано: 16 Октябрь 2024
на канале: Zero Amps Electronics

64,004

522

This is a video in which I show you how to upgrade firmware in USBasp programmers mainly ordered from China. This is an important procedure if you want to program ATtiny10, ATtiny9, ATtiny5 and ATtiny4 AVR 8-bit microcontrollers which are programmed using TPI programming interface.

The firmware upgrade also helps you to remove following warning from avrdude:
“avrdude: warning: cannot set sck period. please check for usbasp firmware update.”

You can download the latest firmware on https://www.fischl.de/usbasp/.

🛠 Tools which I use in the video 🛠
➟ USBasp Programmer
https://s.click.aliexpress.com/e/_977rmx
➟ 10-Pin to 6-Pin Adapter
https://s.click.aliexpress.com/e/_AsFVSj
➟ 10-Pin Ribbon Cable
https://s.click.aliexpress.com/e/_A5ZboP
➟ Soldering Iron
https://s.click.aliexpress.com/e/_97w33d
➟ Lead Solder Wire
https://s.click.aliexpress.com/e/_A7iO7t
➟ 900M-T Series Soldering Iron Tips
https://s.click.aliexpress.com/e/_ALmhnD
➟ Precision PCB Holder
https://s.click.aliexpress.com/e/_AgYEBV
➟ Pin Headers
https://s.click.aliexpress.com/e/_AYWcmF
➟ Arduino Uno
https://s.click.aliexpress.com/e/_AX6tvJ

Stay creative and keep on tinkering 😊