How to Replace the Bearing Hub on a Zanussi or Electrolux Washing Machine
My spare parts store https://tehremont.xyz
Buy washing machine parts https://tehremont.xyz/g60181826-zapch...
Buy drum supports for washing machines https://tehremont.xyz/g60088773-opory...
Buy a bearing block https://tehremont.xyz/g60088787-suppo...
Buy a drain pump for a washing machine https://tehremont.xyz/g60088777-pompy
I'd like to apologize for the video quality; I filmed it spontaneously, meaning without preparation. Replacing the bearing block on a Zanussi, Electrolux, or Priveleg top-loading washing machine yourself isn't as difficult as it seems at first glance. This part can have several names: hub, caliper, or bearing block—it's all a matter of personal preference, but I think the essence of the matter remains the same. The first thing you should note is that the pulley side has a caliper with left-hand threads. If you look at the opposite side, you'll see a hub with a standard right-hand thread. You can make your own key; this video shows how to do it using scrap materials. Another nuance: this part can have several modifications, meaning this block can use a 6203 or 6204 bearing, so before ordering the part from a store, you should confirm which bearing is in your caliper. This part usually comes complete with an oil seal and grease—this is definitely the case with EBI. Basically, all the main details are shown in this video. You can use the grease that comes in the kit; it's quite sufficient. If you don't like it, you can use Anderol or Hydra. Happy repairing.