Anycubic kobra2 pro Diagonal Brace Installation Instructions
You professional Upgrade Supplier.
Anycubic kobra2 Pro Upgrade Kit link ：https://strong3d.myshopify.com/produc...
The STL file used in the video can be downloaded from the following link: https://www.thingiverse.com/thing:642....
Note: The parts for sale have some minor differences from those shown in the video, but the installation method is the same.
kobra2 pro Diagonal Brace Installation Instructions：
1.Remove the screws from the top profile of the machine.
2.After placing the isolation columns, use M5*30 screws to secure the upper left bracket to the profile.
3.Use M5*8 screws and M5 T-nuts to attach the lower left bracket to the profile, securing the assembly in place.
4.Tighten the two diagonal braces together.
5.Use M5*18 screws and M5 screws to respectively fasten the ends of the diagonal brace to the upper and lower brackets. Place an isolation column between the brace and the bracket. If the hole positions do not align, adjust the adjustable joint bolt on the diagonal brace by tightening/loosening it to the appropriate position.
6.Tighten the nut on the adjustable joint bolt. Repeat the same process for the other side.
7.Remove the screws securing the display bracket, disconnect the display cables.
8.On the printed bracket, insert M5*8 screws and M5 T-nuts.and then detach the display from the bracket.
9.Mount the display onto the printed bracket.
10.Secure the bracket onto the profile, then reconnect the display cables.