How to make a wax seal
✨ How to make a wax seal ✨
Step 1: Plug in your low temp glue gun and place the sealing wax into the gun. It will take a few minutes for the wax to warm up.
Step 2: While your gun is heating up get our your silicone makers mat, or roll out a sheet of parchment paper.
Step 3: Once the wax is warm, rest the gun on its stand and lean the tip of the gun forward. Pour wax onto mat or parchment paper. You’ll need about one squeeze. The pour should be about the size of a quarter.
Step 4: Place your wax stamp into the wax. You’ll want to use some pressure to push the stamp into the wax (this will give a good impression). Hold onto the stamp for a second or two until it has set and isn’t moving anymore.
Step 5: Let the wax cool. Then pull the wax seal off of the stamp. If the seal isn’t coming off, that means it is too hot and that you need to let it cool more.
Step 6: Place one of your stickers on the back and now it is ready to use whenever you’re sending a card.
That’s the basics! Let me know what questions you have as you’re making your wax seals AND I’d love to see the seals you make, add a photo of them in the comments below!